for Cold Climate Housing and much more

Found 42 results for the keyword ‘Humidity’

  • How do I install an exhaust fan in a basement?

    Draw air off the floor, not off the ceiling The basement is different than the rest of the house because the floor is colder, attracting more moisture, and the cold air falls and is trapped on the floor as well. So the first step is to plan for the exhaust fan to draw the air off the floor of th...
  • Insulating an above grade block wall from the inside

    This article deals with a block wall above grade.  For a below grade block wall see Basement Perimeter Drainage and Leaking Foundations.   Bryan is faced with a totally un-insulated cinder block wall with 1x2 strapping and a plaster covering.  He is thinking about stripping it back to the block...
  • Weather Restrictions: Water Repellents for wood and masonry

    Connect to your favourite weather forecaster and look for the following conditions:   Category: Finishes     Product: Water Repellents  for wood and masonry Temperature Limitations: Use above +10 C (+50 F) and below + 35 C (+95 F) Rain Limitations: No rain for 48 hours Wind Limitations:  n/a...
  • Hardwood Floors, nailing and shrinkage

    Holly in Wasi Lake, Ontario wants to know why her 1x10 pine tongue-and-groove floors are shrinking and leaving such large cracks. If you look at traditional hardwood floors you will notice that each board is rather narrow. In fact it is difficult to locate hardwood floors that are wider than 4 i...
  • WHAT IS AN AIR-TO-AIR HEAT EXCHANGER, HRV and ERV?

    Air-change ventilation systems exist that take stale air out and bring fresh air in so as to not rely on cold air drafts for the entry of fresh air to the house. They are simply a box with two fans. In a few of the warm spots of Canada these are legitimate systems on their own. In most of Canada ...
  • I painted my bathroom and now I am getting mould!

    Anne painted her bathroom with latex paint and then started to get mould and mildew where she never had any before. She is wondering what she did wrong? Mould is caused by the prolonged presence of condensation. Condensation is caused by a combination of high humidity and low temperatures. If yo...
  • A window that is warmer than the insulated wall

    I have always said that as far as the cold getting into your house is concerned, a window is always the coldest part of a wall. But no longer. A company called Prelco from Riviere-du-loup, Quebec has produced a window called Prel-Therm that actually plugs into your electrical system. That's right...
  • Working with Contact Cement

    Contact cement is a uniquely useful adhesive. It will adhere to most all surfaces and hence is often the in-between for sticking two different materials together. It comes in two basic varieties, solvent based and water based, the later often being called "green" or "solvent free". Although thes...
  • Green ooze from electrical outlets???

    Yes it happens -- but Why? Two viewers have strange problems with their electrical outlets. One has had bright green oily ooze coming out of an electrical outlet on and off for the last two years. Changing the outlet didn't stop it. Another has green deposits at the outlet every time she uses he...
  • HOW MUCH MOISTURE DAMAGE CAN A LITTLE CRACK CAUSE?

    Little cracks in the bottom of the house let cold air in, and can raise your heating costs by as much as $600 a year. They also dry out the air in the house, resulting in dry throats and the needless purchase of humidifiers. Nothing too serious -- unless you don't like wasting money! Let's start...