Found 38 results for the keyword ‘Overview’

  • Cutting angles for Crown Molding

    Riana from Huntsville Ontario is struggling with getting the miter cuts right for crown molding. First rule, use a large miter box (purchased, rented or home made) that allows you to make simple 45 degree with the molding standing up in its regular position. Well, almost in its regular position....
  • Overview - Building the base to a tiled shower.

    Most people don't realize it but glazed tiles are not completely waterproof although they are highly water resistant. The reality is that the tile and the grout are not the final line of defence against water leaking through to the ceiling below. A proper built-in shower stall starts with a tape...
  • OVERVIEW: Changing the roof or roof covering on a house

    As I look at my own database, I see that I have almost 100 answers to specific questions about roofs and roofing.  Despite a good search engine, that much scattered information can get confusing.  Let me make just a couple of overview statements to help guide you in getting your existing or new r...
  • The river is rising – preparing for a flood: OVERVIEW

    This article is about stopping water outside the house, then if necessary, controlling the situation as your basement floods.  For some very interesting water alarms, covering both plumbing and overland water,see Stopping Plumbing Floods.   SANDBAGGING The first line of defense is sandbaggin...
  • WHAT ARE THE RULES FOR APPLYING INSULATION IN THE ATTIC?

    -- Take care of air barriers, ventilation and vapour barriers before insulating. Check out these three topics in the Search Tab above.-- Don't block the eave vents with insulation.-- Do cover the top of the outside wall.-- Don't put plastic foam on top of porous insulations (batts, loose fill) a...
  • Overview: To HRV-ERV or not to HRV-ERV

    I am always amazed at house construction where so often things are half built or more while people are running around beginning to think about "extras" that should never be though of as "extras" but as part of the essential system. So time for one of my lectures -- (you asked for it).Heating is o...
  • OVERVIEW: When do I need to remove snow from a roof?

      For most houses, never -- let nature handle it. The reason for that is that most roofs are built to handle the snow that is piled up on it, removing snow is dangerous to you and often the process of snow removal causes more damage to the roof than the snow would. Those were the conclusions tha...
  • Overview: Attic Moisture

    Ventilation in a Canadian attic does very little to remove moisture when the temperature in the attic is below freezing. During that time, the moisture is in the form of Ice and the passing air simply won't remove it -- whether you have passive vents or power vents. When things warm up, if the ...
  • WHICH CAULKING SHOULD I USE?

    -- Oil base, resin base and polyvinyl acetate caulking do not hold up. There are far too many better caulkings available to waste time and money with these old formulations.-- Latex based caulking is inexpensive, can be painted and has medium durability. It is acceptable for baseboards and caul...
  • OVERVIEW: Lubricants: Why are there so many choices?

    Lubricants are products designed to make things slip. Sister products that have some lubrication but are specialized for other uses are penetrating oils that are used to loosen up rusted parts, drying sprays designed to remove water from electrical wires and some cleaning sprays. Although I use...