When you want to take resin or glue off of drill bits and saw blades you don't want to use just any solvent to do the job.
In fact one of the resin cleaners that we hear about in DIY books is to use an oven cleaner. It certainly does remove burned on resin efficiently. Unfortunately it also eats...
When you use a hole saw, it is often very difficult to get the plug out of the saw cup when you are done. More and more manufacturers have provided slots on the side of the hole saw to allow you to jam a screwdriver in and pry the plug out. But this is often not so easy. (By the way, the larger t...
DRILLING A TILE
When you want to hang something on ceramic tiles you will need to drill a hole. Regular metal cutting twist bits will not cut through the hard ceramic face, and in fact the ceramic material itself will destroy such a bit. You need to use a bit that has a carbide head....
When condensation shows up inside a thermal pane double window (between the two pieces of glass), you know that the seals around the edge have been compromised, allowing moisture to get inside. These cannot really be re-sealed so the standard response to this problem is to replace the gla...
As weather patterns change we are getting longer colder periods than traditionally in many areas of the country -- and with that, more and more complaints of water pipes freezing. Finding the frozen point can be difficult, thawing it can be problematic but if you have done those two, go one step ...
Drill
A “drill” is defined as a spinning device that has an adjustable chuck able to clamp down onto a twist bit of just about any size. Yes they still make them – usually called “drill/drivers”, because you can also put screw bits into them. The simplest ones available are usually variable...
Video conferencing, like Zoom, is known for head-to-head talks, but it is also a dynamic tool for interactive inspections, remote on-site consultations, and remote on-site teaching. In 2016 I tried to start a Zoom interactive webinar but back then, not many people were comfortable with video c...
If you are just talking about keeping the house from falling down around your head, and a few minor adjustments or additions here and there, but no real renovations -- the tool kit is rather simple.
A multiple head screwdriver.
A pair of pliers.
A pair of clamping pliers.
A light hammer.
A g...
