for Cold Climate Housing and much more

Found 5 results for the keyword ‘Angles’

  • Cutting angles for Crown Molding

    Riana from Huntsville Ontario is struggling with getting the miter cuts right for crown molding. First rule, use a large miter box (purchased, rented or home made) that allows you to make simple 45 degree with the molding standing up in its regular position. Well, almost in its regular position....
  • Basic Construction connectors

    Most of you are aware that metal connectors are often used to hold things together in a house, much more than in the good old days. The most common one that most people can see in relatively new basements, even decks, is the joist hanger you see in the second photo. Rather than having to sit th...
  • Choosing a mitre saw.

    One of our viewers is looking to redo all the trim in his house so he is wondering which mitre saw he should buy. The variety is very confusing but there are two basic types:  Fixed mitre boxes that go up and down. They will cut mitres, angles to the right or the left and most of them will cut...
  • Cutting crown moldings with a mitre saw.

    Cutting crown moldings can be simple and it can be difficult. First you want to check if the corner you are putting the molding into is in fact 90 degrees. If you don't check that you can get real frustrated with your mitre saw. 88 or 92 degree walls require different mitre cuts. Over the years...
  • A great new tool for measuring angles - The SawSet

    A great new tool for measuring angles – The SawSet.  Cabinet makers and finished carpenters have always used two legged devices that you could set to any angle, lock down and transfer that angle to something else. But to measure angles, we have always been limited to reading impossible little ray...