for Cold Climate Housing and much more

Found 11 results for the keyword ‘Plywood’

  • Painting plywood edges.

    A rough plywood shelf edge will not look good if you simply paint it with the rest of the shelf.Even after sanding it smooth, it will not take paint well. And if you are going to paint the shelf, you shouldn't waste your time and money trying to put glue-on trim on the edge.To get it to look good...
  • A special screw device for squeaking floors

    You have probably seen this gadget called Squeeek-No-More in the store or at home show demos and wondered if it actually works. It does, under certain conditions. The idea is to drive a screw into the floor, perhaps right through the rug, have the threads hold in both the floor joist and in the ...
  • Details on Engineered Floor Coverings

    To my mind old fashioned hardwood floors are far more trouble than they are worth, especially now that we have better and better Engineered Floors available. An engineered floor is not a cheap plastic laminate on masonite floating floor. It is a very stable, usually pre-finished, real massive h...
  • Is it good practice to eleminate the chipboard on the outside of the house?

    Wagish from Brampton, Ontario is worried about the ongoing construction of his new home as they have not put a wooden sheathing on the outside of the house. He asks: "Is the insulation value and strength of the wall compromised by not using the chipboard?".First things first. "Chipboard" should...
  • How not to waste wood when cutting plywood.

    You can waste a lot of plywood if you don't make a cut diagram or cutting plan before slicing into a piece of plywood. One of the most common errors is not thinking about which way the grain of the surface wood is going. In some projects, especially with veneer finished plywoods, this is critic...
  • Can I install hardwood floors on an OSB subfloor.

    Ricky from Brampton, Ontario asks: "Is it better to put a pre-finished hardwood floor on OSB or on plywood? My sub-floor is OSB and they say I would have to lay 1/8" plywood on top of it. Would nailing or stapling determine the type of sub-floor?"First of all Ricky, let's look at the photo abov...
  • Making panels follow a curve

    Often designers, or your own artistic urges, call for a curve in the riser of a stairway or perhaps a whole wall, and you have to figure out how to get that done.There is a great new invention for making the structure of curves walls. It is like the bottom track of a metal stud wall but it ha...
  • Insulating a Cathedral Ceiling - OVERVIEW

    Hello Jon, I have a cathedral ceiling with a shingled roof. If I insulate the roof air tight, will the shingles lift and curl as they do on poorly ventilated roofs? The other thought is leaving an 1 1/2 inch space between the roof deck and the insulation  and installing a ridge vent, which give...
  • Important precautions for installing large tiles

    The world of tiles is changing rapidly.  Twenty years ago we generally had a range of tile sizes from 1 ft x 1 ft down to tiny mosaic tiles.  This made tiling relatively simple because slight changes in the flatness of the surface could be adjusted for at the next grout line.  In fact that is...
  • Working with Contact Cement

    Contact cement is a uniquely useful adhesive. It will adhere to most all surfaces and hence is often the in-between for sticking two different materials together. It comes in two basic varieties, solvent based and water based, the later often being called "green" or "solvent free". Although thes...